Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump of the Aprilia RSV4 1000

Model: Aprilia Rsv4 1000
Part: Pump

Video tutorial

In this guide, we will see the main instructions on how to disassemble and replace the water pump of the Aprilia RSV4 1000 motorcycle. First, we put the motorcycle on the stand and start disconnecting the water pump hose, loosening the metal clamp; let the fluid drain into a container, as shown in the video.

At this point, we unscrew the screws of the water pump housing, removing it and replacing it with the new original one; we correctly install the housing with the new gasket, connecting the sleeve and finally pouring the new coolant.


Posted on 28 September 2025 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Aprilia RSV4 1000 Factory
How to replace the engine oil and oil filter of the Aprilia RSV4 1000 Factory
Rsv4 1000 In this guide, we will see the main instructions on how to perform the routine maintenance service, replacing the engine oil and oil filter, of the A…
How to Replace the Front Brake Lever on the Aprilia RSV4 1000
How to Replace the Front Brake Lever on the Aprilia RSV4 1000
Rsv4 1000 Today's instructions will show you how to remove and replace the front brake lever on the Aprilia RSV4 1000 in simple and quick steps. First, place y…
How to Change the Engine Oil on the Aprilia RSV4 1000
How to Change the Engine Oil on the Aprilia RSV4 1000
Rsv4 1000 This guide explains how to replace the engine oil and oil filter during the regular maintenance service on the Aprilia RSV4 1000. First, remove the l…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos