Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha X City 250
Part: Clock

In order to set the clock of the Yamaha X-City 250, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is turned on, you can press and hold the button on the right side of the instrument panel, and you will notice that the hours will start flashing. By pressing this button, you can adjust the hours. Pressing the button on the left side of the panel will make the minutes flash, which can also be adjusted in the same way.

Posted on 29 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Filter from the Yamaha X City 250
How to Remove the Air Filter from the Yamaha X City 250
X City 250 .. the air filter from the casing of your Yamaha X City 250 is one of the simplest and quickest tasks you can do independently without any issues. Here’s h.. …
Oil and Filter Change on Yamaha X-City 250
Oil and Filter Change on Yamaha X-City 250
X City 250 To replace the oil on the Yamaha X-City or X-Max, you need to obtain 1.2 litres of semi-synthetic 10W40 oil, costing around £12.00 per litre. At the …
Oil Change on X City 250
Oil Change on X City 250
X City 250 Position an oil collection tray under the oil drain. Open the oil filler cap and proceed to unscrew the drain plug as specified in the video. Once al…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos