Do it yourself
Frequently asked questions about cars and motorcycles
Position an oil collection tray under the oil drain. Open the oil filler cap and proceed to unscrew the drain plug as specified in the video. Once all the oil has drained, you can re-screw the drain plug and tighten it properly. From the right side of the engine, you can refill the new oil of the type recommended by the manufacturer, ensuring to respect the maximum level (check it using the dipstick located in the cap). Once the refilling operation is complete, close the plastic cap, tightening it properly.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

X City 250 In order to set the clock of the Yamaha X-City 250, you need to turn on the instrument panel by inserting the ignition key into the corresponding slo…
X City 250 Removing the air filter from the casing of your Yamaha X City 250 is one of the simplest and quickest tasks you can do independently without any issu…
X City 250 To replace the oil on the Yamaha X-City or X-Max, you need to obtain 1.2 litres of semi-synthetic 10W40 oil, costing around £12.00 per litre. At the …

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos