Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Seat - Do-it-yourself video guides

Harley Davidson Sportster
How to remove the seat of the Harley Davidson Sportster.
Below we will see the necessary instructions on how to disassemble and replace the driver's seat of the Harley Davidson Sportster motorcycle. First, we put the …read all…
Posted on 10 February 2024 by ScegliAuto
Mvagusta Turismo Veloce
How to disassemble and reassemble the passenger and driver seats of the Mv Agusta Turismo Veloce 800
Let's see in this short and simple guide how to disassemble and reassemble the passenger seat and the driver's seat of the Mv Agusta Turismo Veloce 800 …read all…
Posted on 13 October 2022 by ScegliAuto
Enfield Classic 350
How to remove the rear seat of the Royal Enfield Classic 350
Let's see in this short and simple guide the procedure necessary to disassemble the rear seat of the Royal Enfield Classic 350 motorcycle. First we put the …read all…
Posted on 5 August 2022 by ScegliAuto
Suzuki Gsxr 1000
Removing the seat of Suzuki GSX-R 1000 (2016)
In this short video we will see how to remove and replace the driver's seat on the 2016 Suzuki GSX-R 1000, but also on the previous model, in simple steps. …read all…
Posted on 21 June 2022 by ScegliAuto
Sherco Se 300
How to replace the seat cover on the Sherco SE-R 300
Let's see in this video how to remove and replace the driver's seat cover on the Sherco SE-R 300 enduro motorcycle, following these simple steps. First we go …read all…
Posted on 15 June 2022 by ScegliAuto
Peugeot Speedfight 2
How to remove the seat and the helmet compartment of the Peugeot Speedfight 2
We are going to illustrate below the main instructions that will allow us to disassemble and replace the seat and the helmet compartment of the Peugeot …read all…
Posted on 19 May 2022 by ScegliAuto
Moto Guzzi V7 Stone
How to remove the seat on the Moto Guzzi V7 III Stone (2017)
In this short video we will see how to remove and replace the driver and passenger seats on the 2017 Moto Guzzi V7 III Stone, following these simple steps. …read all…
Posted on 16 May 2022 by ScegliAuto
Husqvarna Fc 250
How to remove the seat of the Husqvarna Fc 250
Let's find out in this guide the instructions necessary to remove the driver's seat of the Husqvarna Fc 250, following these simple steps. First of all we put …read all…
Posted on 16 May 2024 by ScegliAuto
Piaggio Mp3
How to remove the Piaggio Mp3 seat
Let's find out in this short and simple guide how to remove and replace the driver and passenger seats of the Piaggio MP3 scooter, following the instructions …read all…
Posted on 19 April 2024 by ScegliAuto
Keeway Superlight
How do you replace the seat on the Keeway Superlight?
In order to replace the seat of the Keeway Superlight you need to loosen the screws located on the side of the bike, both on the right and on the left. The …read all…
Posted on 2 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos