Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to get under the saddle, how to refuel, and how to access the battery in a Piaggio Liberty 125

Model: Piaggio Liberty 125
Part: Seat

Video tutorial

So I'll tell you that it's very easy because to open the seat you simply have to turn the key in the ignition lock to the left. At this point the seat unlocks and you can lift it, underneath you will find the underseat compartment useful for storing the helmet or some objects.

Refueling is very convenient, the fuel tank cap is located right under the seat near the rear edge. To access the battery you will always find it under the seat.

It should all be easy and understandable, but if you don't feel comfortable operating in DIY mode, contact the dealer or a specialized workshop, you will see that you will solve it in no time.


Posted on 5 April 2025 by ScegliAuto


Related tutorials

How do you bleed the brakes on the Piaggio Liberty 125?
How do you bleed the brakes on the Piaggio Liberty 125?
Liberty 125 In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers.…
How do you replace the transmission of the Piaggio Liberty 125?
How do you replace the transmission of the Piaggio Liberty 125?
Liberty 125 In order to replace the transmission of the Piaggio Liberty 125, you need to loosen the screws that fix the cover located near the rear wheel, on the…
How to Change the Engine Oil of the Piaggio Liberty 125?
How to Change the Engine Oil of the Piaggio Liberty 125?
Liberty 125 To change the engine oil of the Piaggio Liberty 125, loosen the oil drain plug located at the central lower area of the bike, near the exhaust. By un…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos