Do it yourself
Frequently asked questions about cars and motorcycles
In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers. Once these plugs have been removed, you can connect them to tubes so that when you pump the brake lever, the fluid will come out. Once the fluid has been completely expelled, you can open the caps of the small reservoirs located on the sides of the levers and add the necessary amount of brake oil.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Liberty 125 In this tutorial, you will learn how to remove and replace the rear brake shoes of the Piaggio Liberty 125 scooter. First, place your scooter on the …
Liberty 125 In today's tutorial video, we will see how to disassemble and replace the rear brake shoes of the Piaggio Liberty 125 scooter, as well as the 50. Fir…
Liberty 125 Today, in this short guide, learn how to change the engine oil of the Piaggio Liberty 125 scooter. First, place the scooter on its centre stand and s…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos