Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the transmission of the Piaggio Liberty 125, you need to loosen the screws that fix the cover located near the rear wheel, on the left side of the motorcycle: once the screws of the cover have been removed, you will be able to locate the clutch and the variator underneath. By loosening the central nuts of both components, you will be able to remove them along with the belt around them; in this way, you can insert the new components, cover everything with the cover, and check their operation.

Posted on 25 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the belt and variator of the Piaggio Liberty 125
How to replace the belt and variator of the Piaggio Liberty 125
Liberty 125 Today's main instructions will show us how to disassemble and replace the belt, the variator, and the rollers of the Piaggio Liberty 125 scooter. Fir…
How to replace the air filter of the Piaggio Liberty 125 - 50
How to replace the air filter of the Piaggio Liberty 125 - 50
Liberty 125 Follow these steps to remove and replace the air filter cartridge of the Piaggio Liberty 125 scooter, as well as the 50. First, place your scooter on…
Replacing the Front Headlight Bulb on Piaggio Liberty 125
Replacing the Front Headlight Bulb on Piaggio Liberty 125
Liberty 125 In this video, we will see how to remove and replace the front headlight bulb on a Piaggio Liberty 125. First, we will remove the screws that hold th…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos