Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the stator of the LML Star, you need to completely disassemble the engine and transmission unit, removing it from its housing. On its side, you will find the stator flywheel, which must be removed by loosening the central nut that secures it to its spindle: once the flywheel is removed, you can locate the underlying stator, which must also be removed by unscrewing its securing screws. At this point, you can insert the new stator, securing it with the screws and then reinstalling the corresponding flywheel.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Stator from the LML Star?
How to Remove the Stator from the LML Star?
Star To replace the stator on the LML Star, remove the right-hand engine cover by simply unfastening it. Underneath, there will be six bolts that need to …
How to Remove the Electronic Ignition (Flywheel and Stator) on LML Star
How to Remove the Electronic Ignition (Flywheel and Stator) on LML Star
Star In this tutorial, we will see how to remove the electronic ignition, specifically the flywheel (or rotor) and stator, on an LML Star 125-150-200, as …
How do you replace the clutch of the LML Star?
How do you replace the clutch of the LML Star?
Star In order to replace the clutch of the LML Star, you need to loosen the casing located near the rear wheel: once the screws are removed, you can detac…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos