Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stator from the LML Star?

Model: Lml Star
Part: Checks and maintenance

Video tutorial

To replace the stator on the LML Star, remove the right-hand engine cover by simply unfastening it. Underneath, there will be six bolts that need to be loosened to remove the plastic cover. Next, unscrew the nut on the central shaft while holding the fan in place; this will allow you to remove the flywheel, beneath which the stator is located.

By disconnecting the connectors and loosening its mounting screws, the stator can be extracted from its housing and replaced. After replacement, refit all previously removed parts.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Replace the Stator of the LML Star?
How to Replace the Stator of the LML Star?
Star To remove the stator of the LML Star, you need to completely disassemble the engine and transmission unit, removing it from its housing. On its side,…
How to Remove the Electronic Ignition (Flywheel and Stator) on LML Star
How to Remove the Electronic Ignition (Flywheel and Stator) on LML Star
Star In this tutorial, we will see how to remove the electronic ignition, specifically the flywheel (or rotor) and stator, on an LML Star 125-150-200, as …
How to Replace the Starter Motor on an LML Star?
How to Replace the Starter Motor on an LML Star?
Star To replace the starter motor on an LML Star, remove the right side panel of the bike, located near the seat. Under this panel, you will find the star…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos