Do it yourself
Frequently asked questions about cars and motorcycles
To replace the stator of a Honda CBR 600RR, loosen all the screws securing the cover located on the left side of the bike, near the kickstarter. Once all screws securing the casing are loosened, it can be removed to reveal the underlying stator. Disconnect the connector attached to the back of the stator to remove it from its housing. Next, insert a new stator into its seat after connecting it to the connector; finally, replace the casing, securing it with the appropriate screws.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbr 600 Rr It will be possible to replace the clutch that is installed on the Honda CBR 600RR by loosening the screws that secure the trim panel to its housing,…
Cbr 600 Rr Replacing the battery in the Honda CBR 600RR, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure the ke…
Cbr 600 Rr In this tutorial, you will learn how to change the engine oil in a Honda CBR 600RR, a simple and quick operation. First, ensure the engine is cool en…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos