Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate, Deactivate, and Calibrate the ASR System on the Piaggio Beverly HPE 300

Model: Piaggio Beverly 300 Hpe
Part: Checks and maintenance

Video tutorial

In this video, you can see how to activate and deactivate the ASR system on the Piaggio Beverly HPE 300. This operation must be done with the engine off. You need to hold down the "ASR" button located on the left dial: you will see the "ABS" warning light on the screen flashing to indicate it is active.

If you hold it down for a couple of seconds, it will light up steadily, meaning it is deactivated; to activate it again, simply hold it down.

This calibration is necessary if you change the tyres, and then you must drive a few metres until the light stops flashing. The YouTuber illustrates various calibration phases, as read from the vehicle's user and maintenance manual.


Updated on 9 November 2026 by ScegliAuto


Related tutorials

How to change the color of the display of the Piaggio Beverly 300 HPE
How to change the color of the display of the Piaggio Beverly 300 HPE
Beverly 300 Hpe The display of the central panel of your Piaggio Beverly 300 HPE can be shown in two different colors. If you want to change it manually, just follow…
How to Adjust the Headlight Height on a Piaggio Beverly 300 HPE
How to Adjust the Headlight Height on a Piaggio Beverly 300 HPE
Beverly 300 Hpe Today we will discover the instructions that will allow us to adjust the height of the front headlight on the Piaggio Beverly 300 HPE scooter. First,…
Replacing the remote battery of the Piaggio Beverly 300 HPE
Beverly 300 Hpe Today, let's discover the procedure to disassemble and replace the battery of the remote key for the Piaggio Beverly 300 HPE scooter. First, take you…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos