Do it yourself
Frequently asked questions about cars and motorcycles

How do you set the clock on the Sym Jet X 150?

Model: Sym Jet X 150
Part: Clock

Video tutorial

In order to set the clock on the Sym Jet X 150, you need to turn on the instrument panel and then press and hold the MODE button located on the left side of the panel. While continuing to hold it down, you will notice that the hours will start flashing.

When this happens, you will need to press the SET button repeatedly located on the right side of the panel; this will allow you to change the hours. Once these are modified, press the MODE button again and then you will be able to change the minutes following the same procedure.


Posted on 10 December 2024 by ScegliAuto


Related tutorials

Jet X 150 In this tutorial, you will learn how to set the time on the SYM Jet X 150 scooter, a very simple and quick operation to perform, for example, after d…
Jet X 150 To replace the battery of the Sym Jet X 150, open the under-seat compartment by inserting the key into the designated side lock. Once the compartment…
Jet X 150 To change the engine oil of the Sym Jet X 150, loosen the bolt located at the central lower part of the bike, just behind the stand: by unscrewing th…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos