|
Do it yourself
| |||
| ||||
How to Change the Engine Oil of the Sym Jet X 150
Model: Sym Jet X 150
Video tutorial
To change the engine oil of the Sym Jet X 150, loosen the bolt located at the central lower part of the bike, just behind the stand: by unscrewing this bolt, you will be able to open the drain plug, allowing all the used oil to flow into a suitably positioned container. Once all the oil has drained out, close the drain plug and top up the oil: this will be done by pouring oil into the hole located on the right side of the bike, just above the exhaust.
Updated on 26 June 2026 by ScegliAuto
Related tutorials
Jet X 150
In this tutorial, we will see how to reset the oil service on the SYM Jet X 150 scooter, a very simple and quick operation. Before proceeding, ensure…
Jet X 150
In this tutorial, you will learn how to set the time on the SYM Jet X 150 scooter, a very simple and quick operation to perform, for example, after d…
Jet X 150
In order to set the clock on the Sym Jet X 150, you need to turn on the instrument panel and then press and hold the MODE button located on the left …
|
How to Set the Clock on the Yamaha Xmax 300?
On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.870
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |