Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the color of the display of the Piaggio Beverly 300 HPE

Model: Piaggio Beverly 300 Hpe
Part: Starter motor

Video tutorial

The display of the central panel of your Piaggio Beverly 300 HPE can be shown in two different colors. If you want to change it manually, just follow the steps described in the following guide.

First, insert the key and start the panel of your Piaggio Beverly 300 HPE, then hold down the "Set" button and simultaneously press the "Mode" button next to it three times in a row. Then turn off and turn on the central panel to check the color change of the display.

To return to the previous color, just repeat the same procedure.


Posted on 29 August 2025 by ScegliAuto


Related tutorials

How to reset the service light on the Piaggio Beverly 300 Hpe
How to reset the service light on the Piaggio Beverly 300 Hpe
Beverly 300 Hpe Today we will explain how to reset the service light, related to the maintenance of the Piaggio Beverly 300 Hpe. Turn on the instrument panel and pre…
Replacing the remote battery of the Piaggio Beverly 300 HPE
Beverly 300 Hpe Today, let's discover the procedure to disassemble and replace the battery of the remote key for the Piaggio Beverly 300 HPE scooter. First, take you…
How to Adjust the Headlight Height on a Piaggio Beverly 300 HPE
How to Adjust the Headlight Height on a Piaggio Beverly 300 HPE
Beverly 300 Hpe Today we will discover the instructions that will allow us to adjust the height of the front headlight on the Piaggio Beverly 300 HPE scooter. First,…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos