Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 600 Rr
Part: Clutch

It will be possible to replace the clutch that is installed on the Honda CBR 600RR by loosening the screws that secure the trim panel to its housing, at the bottom center of the right side: once the removal is done, it will be possible to proceed by loosening the screws that secure the clutch discs in order to insert the new ones. These will now need to be secured so that it can be verified that everything works correctly; then it will be necessary to cover everything again with the appropriate cover.

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Clutch on the Honda CBR 600RR?
How to Adjust the Clutch on the Honda CBR 600RR?
Cbr 600 Rr To adjust the clutch on the Honda CBR 600RR, adjust the bolts located near the clutch lever and near the clutch cover: by tightening these bolts, you…
How to Replace the Exhaust of the Honda CBR 600RR?
How to Replace the Exhaust of the Honda CBR 600RR?
Cbr 600 Rr To replace the exhaust of the Honda CBR 600RR, loosen the screws that secure the exhaust end can to its housing: this is located near the rear mudgua…
How do you replace the engine oil of the Honda CBR 600RR?
How do you replace the engine oil of the Honda CBR 600RR?
Cbr 600 Rr The replacement of the motor oil on the Honda CBR 600RR is done by loosening the screws that fix the engine guard plates, located on both sides of th…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos