Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will learn how to change the engine oil in a Honda CBR 600RR, a simple and quick operation. First, ensure the engine is cool enough, then remove the lower fairing and position a container underneath the bike. Next, locate the drain bolt, unscrew it using a 12mm socket spanner, and allow all the oil in the system to drain out. Then, unscrew the old filter, tighten the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Posted on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbr 600 Rr In this tutorial, you can see how to change the engine oil in the Honda CBR 600RR, an extremely simple and quick operation. First, ensure that the en…
Cbr 600 Rr In this tutorial, we can see how to replace the engine oil in the Honda CBR 600RR, an extremely simple and fast operation. First of all, make sure th…
Cbr 600 Rr To change the engine oil of the Honda CBR 600RR, loosen the screws securing the engine protection plate located on both sides of the bike. Once these…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos