Do it yourself
Frequently asked questions about cars and motorcycles
Changing the engine oil in the Honda CBR 600RR, as shown in this tutorial, is an extremely simple and quick operation. First, wait for the engine to be completely cold, then undo the indicated screws and remove the lower fairing. Next, position a container underneath the bike, remove the drain bolt with a 12mm socket, and allow all the oil in the system to drain out. Once this is done, you can remove the old filter, fit the replacement, tighten the bolt, and add the necessary amount of oil through the upper hole.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbr 600 Rr To change the engine oil of the Honda CBR 600RR, loosen the screws securing the engine protection plate located on both sides of the bike. Once these…
Cbr 600 Rr In this tutorial, we can see how to replace the engine oil in the Honda CBR 600RR, an extremely simple and fast operation. First of all, make sure th…
Cbr 600 Rr In this tutorial, you will learn how to change the engine oil in a Honda CBR 600RR, a simple and quick operation. First, ensure the engine is cool en…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos