Do it yourself
Frequently asked questions about cars and motorcycles
To change the engine oil on a Kymco Xtown 300, loosen the drain plug of the oil reservoir, located at the central lower part of the bike: once loosened, you can collect the engine oil in a suitably positioned container. After all the oil has drained, you can also remove the oil filter from underneath and replace it with a new spare part; then, top up by adding the new oil through the filler located on the right side of the bike, near the exhaust.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Xtown 300 To replace the transmission on a Kymco XTown 300, loosen the screws securing the transmission cover located on the left side of the bike near the rea…
Xtown 300 At the scheduled maintenance interval for the Kymco Xtown 300, you need to change the engine oil to keep the engine efficient. Place the scooter on t…
Xtown 300 Below are the instructions to reset the engine fault light on the Kymco Xtown 300 scooter. First, open the seat and unscrew the screws securing the u…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos