Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. :
  3. Xtown 300
    4. : Oil change for the Kymco Xtown 300

Model: Kymco Xtown 300
Part: Engine oil
Oil change for the Kymco Xtown 300

At the expiration date set by the maintenance plan of the Kymco Xtown 300, we need to replace the engine oil to keep the engine efficient. We put the scooter on the central stand, unscrew and remove the oil filler cap. Using a ratchet wrench with a 17mm socket, we unscrew the drain plug located under the engine, where we will have placed a bowl to collect the used oil. Along with the plug, we will find a spring and a mesh filter that we will clean. After draining all the old oil, we reassemble the plug, with its components, tightening it securely. We pour about 0.9l of 10W40 synthetic oil into the filler hole using a funnel and check the correct level with the dipstick on the cap.


Posted on 17 February 2024 by ScegliAuto

How to replace the front brake pads on the Mv Agusta F3 800

In today's video tutorial we will see how to remove and replace the front brake pads of the Mv Agusta F3 800. First of all we put our bike on the stand and we begin to disassemble the front brake calipers, going to unscrew the fixing screws that we find on the sides; once the caliper is removed we can remove the old brake pads, as shown in the video. Now let's clean up the dirt from the caliper and leverage the piston to make it re-enter; then we install the new brake pads and reassemble everything, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos