How to remove the rear wheel of a Kymco Xtown 300

Model: Kymco Xtown 300
Part: Wheel

This video is currently unavailable

This guide provides instructions to remove the rear wheel of the Kymco Xtown 300 scooter. First, place the scooter on its centre stand and begin by removing the exhaust silencer, unscrewing the bracket screws; then disconnect the rear suspension by unscrewing the lower pin, as shown in the video.

At this point, remove the rear swingarm by unscrewing the wheel nuts to take off the wheel; replace it with a new one, securing it properly, and reassemble the suspension and exhaust silencer.

Posted on 13 September 2026 by ScegliAuto

Related tutorials

How to Replace the Transmission on a Kymco XTown 300?

Xtown 300 To replace the transmission on a Kymco XTown 300, loosen the screws securing the transmission cover located on the left side of the bike near the rea…

How to Replace the Air Filter on the Kymco Xtown 300?

Xtown 300 To replace the air filter on the Kymco Xtown 300, loosen the bolts securing the cover located above the rear wheel, directly above the transmission c…

How to Replace the Grips with Heated Ones on a Kymco Xtown 300

Xtown 300 This guide provides instructions for replacing the grips with heated ones on the Kymco Xtown 300 scooter. First, place the scooter on its stand and o…

How to Replace the Rear Brake Pads on the Kymco AK 550

You can replace the rear brake pads on the Kymco AK 550 by loosening the screws that secure the brake caliper in its housing: once these screws are loosened, you can detach the caliper from the disc so that the pads inside can be extracted. The pin that holds them in place must also be removed to allow the new pads to be installed: secure the new pads in the caliper, then reinstall the caliper onto the disc, ensuring everything functions correctly.

Watch the video!

by ScegliAuto

How to remove the rear wheel of a Kymco Xtown 300

Related tutorials

How to Replace the Rear Brake Pads on the Kymco AK 550

More videos