How to Replace the Grips with Heated Ones on a Kymco Xtown 300

Model: Kymco Xtown 300
Part:

This video is currently unavailable

This guide provides instructions for replacing the grips with heated ones on the Kymco Xtown 300 scooter. First, place the scooter on its stand and open the seat to remove the lower plastic panel, accessing the fuse box and allowing the passage of the heated grips' cables; remove the original grips from the handlebars, as shown in the video.

At this point, install and connect the heated grips correctly, checking their operation; then reassemble all previously removed components.

Posted on 7 April 2026 by ScegliAuto

Related tutorials

How to Replace the Transmission on a Kymco XTown 300?

Xtown 300 To replace the transmission on a Kymco XTown 300, loosen the screws securing the transmission cover located on the left side of the bike near the rea…

How to Change the Engine Oil on a Kymco Xtown 300?

Xtown 300 To change the engine oil on a Kymco Xtown 300, loosen the drain plug of the oil reservoir, located at the central lower part of the bike: once loosen…

How to replace the rear brake pads on a Kymco Xtown 300?

Xtown 300 To replace the rear brake pads on a Kymco Xtown 300, loosen the screws that secure the rear brake caliper to its housing, allowing you to detach it f…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!

by ScegliAuto

How to Replace the Grips with Heated Ones on a Kymco Xtown 300

Related tutorials

How to replace the clutch lever on the Sherco SEF 300?

More videos