Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 400
Part: Seat

These short and simple instructions will guide us through the process of disassembling and replacing the seat of the Suzuki Burgman 400 scooter. First, we put the scooter on the center stand and start by opening the seat; then we remove the various plastic covers found underneath and below the seat, as shown in the video. At this point, we unscrew the seat fixing screws to remove it, disconnecting the seat lock opening cable; if necessary, we replace the seat with the new one, fixing it correctly, following the video tutorial until the end!

Posted on 12 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the spark plug on a Suzuki Burgman 400?
How to replace the spark plug on a Suzuki Burgman 400?
Burgman 400 To replace the spark plug on a Suzuki Burgman 400, lift the seat of the motorcycle to detach the fastening rivets near the seat hinges. Once these ri…
How to reset the oil light on the Suzuki Burgman 400
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
How to Replace the Starter Motor on a Suzuki Burgman 400
How to Replace the Starter Motor on a Suzuki Burgman 400
Burgman 400 This guide provides the main instructions on how to remove and replace the starter motor on a Suzuki Burgman 400. First, place the scooter on the cen…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos