Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlamp. Then, extract the front bulb and disconnect the corresponding electrical connector. Once this step is complete, you can remove the blown bulb from your Suzuki Burgman 400, and the disassembly will be complete. To fit the new bulb, simply follow these steps in reverse, and you will have successfully completed the replacement.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Suzuki Burgman 400
How to Replace the Front Headlight Bulb on a Suzuki Burgman 400
Burgman 400 To replace the front headlight bulb on a Suzuki Burgman 400, you need to loosen the screws that secure the front fairing so that it can be completely…
How to Replace the Headlight Bulb on the Suzuki Burgman 400?
How to Replace the Headlight Bulb on the Suzuki Burgman 400?
Burgman 400 To replace the headlight bulb on the Suzuki Burgman 400, loosen the screws securing the front fairing so it can be completely removed from its housin…
How to Replace the Rear Light Bulb of a Suzuki Burgman 400?
How to Replace the Rear Light Bulb of a Suzuki Burgman 400?
Burgman 400 To replace the rear light bulb of the Suzuki Burgman 400, unclip the plastic cover located between the two rear lights by simply unclipping its faste…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos