Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel tank of the KTM Adventure 790

Model: Ktm Adventure 790 R
Part:

Video tutorial

Today we are going to discover the process of disassembling and replacing the fuel tank of the KTM Adventure 790 motorcycle, as well as the Adventure 890. First, we put the motorcycle on the stand and start removing the plastic covers next to the tank; then we unscrew all the fixing screws underneath, disconnecting the fuel line and the electrical connector of the fuel level sensor, as shown in the video.

At this point, we install the new tank, making all the connections, following the video tutorial until the end!


Posted on 11 December 2024 by ScegliAuto


Related tutorials

Guide to disassembling the fuel tank of the KTM Adventure 790 R
Guide to disassembling the fuel tank of the KTM Adventure 790 R
Adventure 790 R Today's steps will illustrate the process of disassembling and replacing the fuel tank of the KTM Adventure 790 R motorcycle (also applicable to the …
Replacing the Air Filter on the KTM 790 Adventure R
Replacing the Air Filter on the KTM 790 Adventure R
Adventure 790 R In today's tutorial, you will learn how to remove and replace the engine air filter on a KTM 790 Adventure R motorcycle, following the instructions b…
How to Replace the Clutch on a KTM Adventure 790?
How to Replace the Clutch on a KTM Adventure 790?
Adventure 790 R To replace the clutch on a KTM Adventure 790, you need to loosen the screws that secure the side cover of the bike, allowing it to be removed from it…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos