Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Service light on the Vespa Sprint 150, you need to insert the ignition key into the corresponding slot: once it has been turned to turn on the instrument panel, you can press and hold the button on the right side of the handlebar. This way, you can wait a few seconds with the button pressed, allowing the Service light to disappear from the instrument panel: once the light has been reset, you can release the button and then turn off the panel by turning the key.

Posted on 8 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the Piaggio Vespa Sprint 150 scooter?
How to reset the service on the Piaggio Vespa Sprint 150 scooter?
Vespa Sprint 150 In this tutorial, you will see how to reset the service on the Piaggio Vespa Sprint 150 scooter, a very simple and quick operation to perform after c…
How to replace the transmission on the Piaggio Vespa Sprint 150?
How to replace the transmission on the Piaggio Vespa Sprint 150?
Vespa Sprint 150 You can replace the transmission on the Piaggio Vespa Sprint 150 by loosening the screws that secure the dedicated cover located at the rear wheel. O…
How do you replace the headlight bulb of the Piaggio Vespa Sprint 150?
How do you replace the headlight bulb of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 In order to replace the headlight bulb of the Piaggio Vespa Sprint 150, you need to loosen the screws that secure the inner covering of the front fai…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos