Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa Sprint 150?

Model: Piaggio Vespa Sprint 150
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil on a Piaggio Vespa Sprint 150, a very simple and quick operation. First, ensure that the engine is cool enough, then position a container underneath it, locate the drain bolt, and unscrew it with a spanner.

Wait for all the oil in the system to drain out, unscrew the old filter using pliers, and tighten the new one. At this point, you can reinsert the bolt, open the top cap, and add the necessary amount of oil to reach the maximum level.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil of the Piaggio Vespa Sprint 150?
How to Replace the Engine Oil of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 To replace the engine oil on the Piaggio Vespa Sprint 150, loosen the drain plug located at the central lower area of the vehicle. Once the plug is l…
How do you replace the air filter of the Piaggio Vespa Sprint 150?
How do you replace the air filter of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 The air filter of the Piaggio Vespa Sprint 150 can be replaced by loosening the screws that secure the filter box near the rear wheel, on the left si…
How to replace the transmission on the Piaggio Vespa Sprint 150?
How to replace the transmission on the Piaggio Vespa Sprint 150?
Vespa Sprint 150 You can replace the transmission on the Piaggio Vespa Sprint 150 by loosening the screws that secure the dedicated cover located at the rear wheel. O…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos