Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Piaggio Vespa Sprint 150?

Model: Piaggio Vespa Sprint 150
Part: Tail light bulb

Video tutorial

In this tutorial, we can see how to replace the rear light bulb on the Piaggio Vespa Sprint 150 scooter, a very simple and quick operation. First, ensure that the key is not inserted, then locate the screw at the back of the light, accessible from the lower left side of the scooter, and unscrew it. Next, grasp the light unit, pull it outward, and separate it from the mount.

At this point, you can grasp the bulb holder, slightly rotate it counterclockwise, and proceed to replace the bulb. To reassemble everything, simply follow the reverse procedure.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlamp Bulb on a Piaggio Vespa Sprint 150?
How to Replace the Headlamp Bulb on a Piaggio Vespa Sprint 150?
Vespa Sprint 150 To replace the headlamp bulb on a Piaggio Vespa Sprint 150, loosen the screws securing the internal cover of the front fairing near the instrument pa…
How to replace the transmission on the Piaggio Vespa Sprint 150?
How to replace the transmission on the Piaggio Vespa Sprint 150?
Vespa Sprint 150 You can replace the transmission on the Piaggio Vespa Sprint 150 by loosening the screws that secure the dedicated cover located at the rear wheel. O…
How do you replace the air filter of the Piaggio Vespa Sprint 150?
How do you replace the air filter of the Piaggio Vespa Sprint 150?
Vespa Sprint 150 The air filter of the Piaggio Vespa Sprint 150 can be replaced by loosening the screws that secure the filter box near the rear wheel, on the left si…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos