Do it yourself
Frequently asked questions about cars and motorcycles
Today's step-by-step instructions will show us how to reset the maintenance service light for the regular oil change of the KTM Duke 390. First, we put the bike on the stand and turn on the instrument panel; then we go to the menu settings using the controls on the left and scroll through the options until we reach the service one, as shown in the video. At this point, we hold down the reset button until the mileage for the next service is reset to zero, following the video tutorial until the end!

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
Duke 390 You can make the Service indicator disappear from the instrument panel of the KTM Duke 390 by inserting the key to turn on the instrument panel, so t…
Duke 390 Resetting the service on the KTM Duke 390, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that all …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos