Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the fuel tank of the KTM Adventure 790 R

Model: Ktm Adventure 790 R
Part:

Video tutorial

Today's steps will illustrate the process of disassembling and replacing the fuel tank of the KTM Adventure 790 R motorcycle (also applicable to the Adventure 890 R). First, we put the motorcycle on the center stand and begin to remove the rider's seat and the plastic side panels of the tank, unscrewing all the fixing screws; then we unscrew the tank screws and disconnect the electrical connector found underneath and the fuel lines, as shown in the video.

To reassemble the fuel tank, simply follow the opposite procedure!


Posted on 16 March 2025 by ScegliAuto


Related tutorials

How to disassemble the fuel tank of the KTM Adventure 790
How to disassemble the fuel tank of the KTM Adventure 790
Adventure 790 R Today we are going to discover the process of disassembling and replacing the fuel tank of the KTM Adventure 790 motorcycle, as well as the Adventure…
Replacing the Air Filter on the KTM 790 Adventure R
Replacing the Air Filter on the KTM 790 Adventure R
Adventure 790 R In today's tutorial, you will learn how to remove and replace the engine air filter on a KTM 790 Adventure R motorcycle, following the instructions b…
Replacing the Air Filter on the KTM Adventure R 790 Enduro
Replacing the Air Filter on the KTM Adventure R 790 Enduro
Adventure 790 R In this video tutorial, learn how to remove and replace the air filter of the engine on the KTM Adventure R 790 Enduro, as well as the Adventure R 89…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos