Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the clock on the Kymco Super Dink 125 scooter?

Model: Kymco Super Dink 125
Part: Clock

Video tutorial

In this tutorial, we can see how to adjust the time on the Kymco Super Dink 125 scooter, an extremely simple and quick operation to be carried out, for example, after disconnecting the battery or following the switch to daylight saving time. First, insert the key, then turn on the instrument panel and reach the odometer "ODO" by holding down the right button on the dashboard.

Next, hold down both the left and right buttons until the clock starts flashing, adjust the hour with the right button, move on to the minutes with the left button, and adjust them in the same way. To save the setting, simply wait a few seconds.


Posted on 12 November 2025 by ScegliAuto


Related tutorials

How to replace the engine oil in the Kymco Super Dink 125 scooter?
How to replace the engine oil in the Kymco Super Dink 125 scooter?
Super Dink 125 In this tutorial, we can see how to replace the engine oil in the Kymco Super Dink 125 scooter, a very simple and quick operation. First, let's make …
How to change the engine oil in the Kymco Super Dink 125 scooter?
How to change the engine oil in the Kymco Super Dink 125 scooter?
Super Dink 125 In this tutorial, we will see how to replace the engine oil in the Kymco Super Dink 125 scooter, a procedure that is extremely simple and quick. Firs…
How to Replace the Battery of the Kymco Super Dink 125
How to Replace the Battery of the Kymco Super Dink 125
Super Dink 125 Today, follow these instructions to remove and replace the battery of the Kymco Super Dink 125 scooter in simple steps. First, place the scooter on i…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos