Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to replace the engine oil in the Kymco Super Dink 125 scooter, a procedure that is extremely simple and quick. First of all, let's make sure that the engine is cool enough. Then, we place a container underneath it, locate the drain bolt, and unscrew it using a 17mm socket wrench. Next, let all the oil in the system drain out, open the filter cap with an 8mm wrench, and insert the replacement. At this point, all that’s left is to reassemble everything and add the necessary amount of oil through the designated opening.

Posted on 4 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Kymco Super Dink 125 scooter?
How to replace the engine oil in the Kymco Super Dink 125 scooter?
Super Dink 125 In this tutorial, we can see how to replace the engine oil in the Kymco Super Dink 125 scooter, a very simple and quick operation. First, let's make …
How to Replace the Battery of the Kymco Super Dink 125
How to Replace the Battery of the Kymco Super Dink 125
Super Dink 125 Today, follow these instructions to remove and replace the battery of the Kymco Super Dink 125 scooter in simple steps. First, place the scooter on i…
How to adjust the clock on the Kymco Super Dink 125 scooter?
How to adjust the clock on the Kymco Super Dink 125 scooter?
Super Dink 125 In this tutorial, we can see how to adjust the time on the Kymco Super Dink 125 scooter, an extremely simple and quick operation to be carried out, f…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos