Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, we can see how to replace the engine oil in the Kymco Super Dink 125 scooter, a very simple and quick operation. First, let's make sure that the engine is cool enough, after which we position a container underneath the scooter, locate the drain hole bolt, and unscrew it with a socket wrench. Next, we also unscrew the cap of the secondary filter, clean it from any dirt residue, and proceed by opening the cap of the main filter. At this point, all that is left is to insert the replacement part, reassemble everything, and add the necessary amount of oil through the designated upper hole.

Posted on 10 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Super Dink 125 .. In this tutorial, we will see how to replace the engine oil in the Kymco Super Dink 125 scooter, a procedure that is extremely simple.. …
Super Dink 125 Today, follow these instructions to remove and replace the battery of the Kymco Super Dink 125 scooter in simple steps. First, place the scooter on i…
Super Dink 125 In this tutorial, we can see how to adjust the time on the Kymco Super Dink 125 scooter, an extremely simple and quick operation to be carried out, f…

How to Replace the Spark Plug on the Sym CruiSym 300

In this short and simple guide, you will learn how to remove and replace the engine spark plug on the Sym CruiSym 300, following the instructions below. First, place your scooter on the centre stand and begin by removing the under-seat compartment to access the upper part of the engine. Then, disconnect the spark plug connector, using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and thread pitch, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos