|
Do it yourself
| |||
| ||||
|
Model: Keeway Cityblade 125
To replace the rear brake pads on a Keeway Cityblade 125, first remove the exhaust by unscrewing the bolts that secure it to its supports. Once the exhaust is removed, you can access the components underneath: here, unscrew the bolts that secure the brake caliper to its housing so that the pads inside can be extracted and replaced. After replacing the pads, reattach the caliper to the appropriate disc and remount the exhaust.
Updated on 11 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Cityblade 125
Before starting, position your Keeway Cityblade 125 on the centre stand. Begin by unscrewing and removing the bolts that secure the exhaust terminal.…
Cityblade 125
To replace the rear brake pads on a Keeway Cityblade, you need to loosen all the bolts securing the exhaust and disconnect it so that it can be compl…
Cityblade 125
To replace the headlight bulb on a Keeway Cityblade, first loosen the bolt located at the front of the bike, just below the windscreen. The other scr…
|
How to Change the Speed Unit on the Piaggio Mp3
If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.240
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
