Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Oil on a Moto Guzzi Stelvio

Model: Moto Guzzi Stelvio
Part: Transmission fluid

Video tutorial

In this video tutorial, you will learn how to replace the transmission oil on a Moto Guzzi Stelvio by following the instructions below. First, place your motorcycle on the centre stand and begin by unscrewing the drain screw located on the transmission using an Allen key; then allow the oil to drain into a container for about ten minutes, as shown in the video.

At this point, unscrew the filler cap and pour in the new gearbox oil of the correct type (in this case, 80w90); fill the sump to the correct level!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Replacing the Transmission Oil of the Moto Guzzi Stelvio
Replacing the Transmission Oil of the Moto Guzzi Stelvio
Stelvio In this video tutorial, follow the main instructions on how to carry out the routine maintenance service for the oil change of the Moto Guzzi Stelvio…
How to Replace the Transmission Oil on a Moto Guzzi Stelvio
How to Replace the Transmission Oil on a Moto Guzzi Stelvio
Stelvio .. In this video, we will see how to replace the transmission oil on a Moto Guzzi Stelvio, a procedure that must be performed at every.. …
How do you replace the motor oil of the Moto Guzzi Stelvio?
How do you replace the motor oil of the Moto Guzzi Stelvio?
Stelvio To replace the motor oil of the Moto Guzzi Stelvio, you need to loosen the drain plug located at the bottom of the oil pan: once this is removed, you…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos