Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Transmission Oil of the Moto Guzzi Stelvio

Model: Moto Guzzi Stelvio
Part: Transmission fluid

Video tutorial

In this video tutorial, follow the main instructions on how to carry out the routine maintenance service for the oil change of the Moto Guzzi Stelvio, as detailed below. First, place the motorcycle on its centre stand and start by unscrewing the oil drain bolt located under the rear gearbox, allowing it to drain into a container for about ten minutes; then, unscrew the filler cap to let the oil flow out more quickly.

Now, top up with the new gearbox oil (approximately one litre is required).


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission Oil on a Moto Guzzi Stelvio
How to Replace the Transmission Oil on a Moto Guzzi Stelvio
Stelvio In this video, we will see how to replace the transmission oil on a Moto Guzzi Stelvio, a procedure that must be performed at every maintenance inter…
How to Replace the Transmission Oil on a Moto Guzzi Stelvio
How to Replace the Transmission Oil on a Moto Guzzi Stelvio
Stelvio In this video tutorial, you will learn how to replace the transmission oil on a Moto Guzzi Stelvio by following the instructions below. First, place …
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
Stelvio In this video, you will learn how to carry out the routine maintenance service for an oil change on a Moto Guzzi Stelvio in simple and quick steps. F…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos