Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : 125 Xcw

Service on KTM 125 XC-W

Model: Ktm 125 Xcw
Part: Engine oil

Video tutorial

Start the engine for a few minutes to warm up the oil, making it more liquid for a quicker and more effective drain. As shown in the video, remove the two 8 mm screws from the bash plate, and pull it down to detach it from its position.

Unscrew the 13 mm bolt that acts as a plug for the engine oil drain hole. Collect the used oil in a container.

Also, unscrew the cap from the upper fill hole to allow air circulation to aid in the outflow of the lubricant (you may also tilt the bike). Close the drain hole with the 13 mm bolt and insert the new lubricant through the upper hole.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Install the Key Switch on the KTM Xcw 125
How to Install the Key Switch on the KTM Xcw 125
125 Xcw In this video, you will see how to install the key switch on the KTM Xcw 125, which comes from the factory without one: remove the front cover, and c…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos