Do it yourself
Frequently asked questions about cars and motorcycles
If the warning light regarding the oil appears on the display of your 2018 Yamaha R3 even though you have recently changed it, then all you have to do is follow these steps to complete the manual reset of the light. First of all, turn on the display and hold down the two buttons located to the left of the display. Then press the lower button several times until you see the word "Trip". At this point, press the same button again and proceed with the manual reset of the oil light.

Posted on 18 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Yamaha R3 In this tutorial, you will see how to replace the engine oil in the Yamaha R3, a very simple and quick operation. First, wait for the engine to cool …
Yamaha R3 In this tutorial, you will learn how to reset the oil service light on a Yamaha R3. This operation is extremely simple and quick, to be performed onl…
Yamaha R3 In this tutorial we can see how to reset the service on the Yamaha R3, an extremely simple and quick operation, to be carried out only once all sched…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos