|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 250
To replace the front shocks on the GasGas EC 250, loosen the bolts that secure the front wheel to the lower part of the fork. Once these bolts are loosened, you can detach the wheel and proceed to remove the shocks from the lower part of the fork, taking out the corresponding rings. After the old shocks have been removed, insert the new ones, securing them properly in their housing and reinstalling the wheel in the corresponding lower part of the fork.
Updated on 11 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 250
The procedure for replacing the brake pads on the GasGas EC 250 is the same for both the front and rear wheels. Use a screwdriver to push the pads aw…
Ec 250
To remove the starter motor from the GasGas EC 250, first loosen the screws that secure the device to its housing, then disconnect all previously rem…
Ec 250
To replace the bearing on the GasGas EC 250, you need to remove the rear wheel by taking the chain off its sprocket and loosening the nuts that secur…
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
