Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant on Gasgas EC 250

Model: Gasgas Ec 250
Part: Antifreeze coolant

Video tutorial

Today, we will see the instructions that will allow us to replace the engine coolant on the Gasgas EC 250 enduro motorcycle. First, place the bike on a stand and start unscrewing the coolant drain screw located under the engine (on the water pump) on the right side, letting it drain into a container; this case also illustrates the replacement of the cooling radiator.

Next, unscrew the filler cap and top up with the new antifreeze, starting the engine and topping up again if necessary!


Posted on 2 May 2026 by ScegliAuto


Related tutorials

Ec 250 This guide explains how to carry out routine maintenance by replacing the gearbox oil, air filter, coolant, checking the condition of the brakes, and…
Ec 250 To replace the exhaust on the GasGas EC 250, loosen the screws securing the side panels of the bike at the rear. Once these panels are removed, you c…
Ec 250 To replace the starter motor on the GasGas EC 250, locate its housing on the left side of the bike, just above the clutch cover. The part can be remo…

How to Adjust the Time on a Triumph Street Triple 1200 RS?

In this tutorial, you will see how to adjust the time on a Triumph Street Triple 1200 RS, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the dashboard and navigate to the general menu on the display using the directional buttons on the left-hand dial. Next, enter "Date & Time", adjust both the clock and the date as needed, and save the setting by returning to the main screen.

Watch the video!


by ScegliAuto

More videos