Do it yourself
Frequently asked questions about cars and motorcycles
This guide explains how to carry out routine maintenance by replacing the gearbox oil, air filter, coolant, checking the condition of the brakes, and lubricating the chain on the Gasgas EC 250 enduro bike. First, drain the transmission oil by removing the drain bolt located under the engine; then top it up. Next, check the wear on the brakes and the play in the lever, tightening the cables if necessary; also ensure that the chain is properly tensioned. Finally, replace the air filter located under the seat!

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec 250 Today, we will go through the instructions for performing routine maintenance by changing the engine oil on the Gasgas EC 250 enduro bike. First, war…
Ec 250 Today, we will see the instructions that will allow us to replace the engine coolant on the Gasgas EC 250 enduro motorcycle. First, place the bike on…
Ec 250 In these brief steps we will see how to replace the transmission oil of the Gasgas EC 250 enduro motorcycle. First of all, we put the motorcycle on t…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos