Do it yourself
| ||||
|
Model: Gasgas Ec 250
Let's see today the instructions that will allow us to carry out the routine maintenance service, replacing the engine oil, of the enduro bike Gasgas EC 250. First, let's warm up the engine for a few minutes and start unscrewing the oil vent bolt. which we find under the engine, using a 6 mm hex wrench; then let the oil drain in a container for about ten minutes, as shown in the video. At this point we unscrew the filler cap and top up, using the oil indicated in the use and maintenance booklet of our motorcycle!
Posted on 27 May 2022 by ScegliAuto
|
How to replace the rear wheel on the Ktm Duke 390Below we will illustrate the guide on how to disassemble and replace the rear wheel of the Ktm Duke 390, following the instructions below. First of all we put the stand on our motorbike and we go to raise the rear wheel from the ground; then we unscrew the central pin of the wheel, disconnecting the chain from the crown, as shown in the video. At this point we remove the wheel and replace the rear sprocket or the brake disc, unscrewing the fixing screws; eventually replace the rear tire and reassemble everything, following the video tutorial to the end. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |