|
Do it yourself
| |||
| ||||
How to Change the Gear Oil in the Gasgas EC 250
Model: Gasgas Ec 250
Video tutorial
Let's go through the procedure to dismantle and replace the transmission oil of the Gasgas EC 250 two-stroke enduro bike in simple and quick steps. First, place your bike on a stand and start unscrewing the fixing screws of the panel located under the engine. Then, use a hex key to unscrew the drain screw, allowing the oil to drain into a container for about ten minutes, as shown in the video. At this point, unscrew the filler cap and refill with new gear oil, following the video until the end!
Updated on 26 May 2026 by ScegliAuto
Related tutorials
Ec 250
In these brief steps we will see how to replace the transmission oil of the Gasgas EC 250 enduro motorcycle. First of all, we put the motorcycle on t…
Ec 250
This guide explains how to carry out routine maintenance by replacing the gearbox oil, air filter, coolant, checking the condition of the brakes, and…
Ec 250
Today, we will go through the instructions for performing routine maintenance by changing the engine oil on the Gasgas EC 250 enduro bike. First, war…
|
How to Set the Clock on the Kymco Agility?
To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |