Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial video, we will see the main instructions on how to dismantle and replace the rear drive on the Moto Guzzi V7. First, lift your motorcycle and begin by removing the rear wheel by unscrewing the bolts of the brake caliper and the central axle of the wheel; then remove the transmission oil by unscrewing the drain bolt, followed by unscrewing the fastening bolts found on the frame, as shown in the video. At this point, carry out the inspection or replacement of the drive, following the tutorial video to the end for reassembly!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Changing the Transmission Oil of the Moto Guzzi V7
Guide to Changing the Transmission Oil of the Moto Guzzi V7
V7 Classic This guide provides the necessary instructions for changing the rear transmission oil of the Moto Guzzi V7 in simple and quick steps. First, place yo…
How to Replace the Tyres on a Moto Guzzi V7 Stone
How to Replace the Tyres on a Moto Guzzi V7 Stone
V7 Classic This guide provides the main instructions on how to remove and replace the tyres on a Moto Guzzi V7 Stone. First, place the motorcycle on a stand and…
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
V7 Classic In today's tutorial video, you will see the steps to perform routine maintenance by replacing the engine oil and transmission oil of the Moto Guzzi V…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos