Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Changing the Transmission Oil of the Moto Guzzi V7

Model: Moto Guzzi V7 Classic
Part: Transmission fluid

Video tutorial

This guide provides the necessary instructions for changing the rear transmission oil of the Moto Guzzi V7 in simple and quick steps. First, place your motorcycle on the centre stand and start unscrewing the oil drain bolt located under the transmission casing (right side); allow the oil to drain into a container for about ten minutes, as shown in the video.

Now unscrew the filler screw and proceed to top up with the appropriate transmission oil; fill to the correct level, following the video until the end!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to replace the gearbox oil and engine oil of the Moto Guzzi V7
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
V7 Classic In today's tutorial video, you will see the steps to perform routine maintenance by replacing the engine oil and transmission oil of the Moto Guzzi V…
How to Change the Engine Oil of a Moto Guzzi V7
How to Change the Engine Oil of a Moto Guzzi V7
V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
V7 Classic How to replace oil and filter on a Moto Guzzi V7 Classic? Follow this guide to perform maintenance. Position the motorcycle on its original stand, an…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos