Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Moto Guzzi V7

Model: Moto Guzzi V7 Classic
Part: Engine oil

Video tutorial

Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Next, locate the oil drain plug under the oil sump and unscrew it, placing a container to collect the used oil. Once the used oil has completely drained, replace the oil filter by screwing in the new one. Finally, reattach the oil drain plug and fill the engine with new oil. With this, you will have successfully completed the engine oil change on your Moto Guzzi V7.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of the Moto Guzzi V7
How to Replace the Engine Oil and Oil Filter of the Moto Guzzi V7
V7 Classic Follow the instructions below to replace the engine oil and oil filter while performing the routine maintenance service on the Moto Guzzi V7. First, …
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
V7 Classic In today's tutorial video, you will see the steps to perform routine maintenance by replacing the engine oil and transmission oil of the Moto Guzzi V…
How to Change the Engine Oil in a Moto Guzzi V7 Classic?
How to Change the Engine Oil in a Moto Guzzi V7 Classic?
V7 Classic In this tutorial, you will see how to change the engine oil in a Moto Guzzi V7 Classic, a very simple and quick operation to be performed every 12 mo…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos