Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter of the Moto Guzzi V7

Model: Moto Guzzi V7 Classic
Part: Engine oil

Video tutorial

Follow the instructions below to replace the engine oil and oil filter while performing the routine maintenance service on the Moto Guzzi V7. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter screw, replacing the cartridge with a new one as shown in the video.

Finally, unscrew the filler cap to top up, filling to the correct level!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a Moto Guzzi V7
How to Change the Engine Oil of a Moto Guzzi V7
V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…
How to Perform a Maintenance Service on a Moto Guzzi V7 Classic
V7 Classic In this video, we will see how to change the oil and its filter, performing the regular maintenance service on a Moto Guzzi V7 Classic. Position the …
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
How to replace the gearbox oil and engine oil of the Moto Guzzi V7
V7 Classic In today's tutorial video, you will see the steps to perform routine maintenance by replacing the engine oil and transmission oil of the Moto Guzzi V…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos