Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Moto Guzzi V7 Classic?

Model: Moto Guzzi V7 Classic
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Moto Guzzi V7 Classic, a very simple and quick operation to be performed every 12 months. First, wait for the engine to cool down sufficiently, then remove the cap from the upper fill hole and subsequently the bolt from the lower drain hole.

Allow all the oil in the system to drain out completely. Open the filter housing and clean it of any dirt residue.

Finally, reassemble everything and insert the new oil through the designated hole.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace Oil and Filter on a Moto Guzzi V7 Classic
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
V7 Classic How to replace oil and filter on a Moto Guzzi V7 Classic? Follow this guide to perform maintenance. Position the motorcycle on its original stand, an…
How to Perform a Maintenance Service on a Moto Guzzi V7 Classic
V7 Classic In this video, we will see how to change the oil and its filter, performing the regular maintenance service on a Moto Guzzi V7 Classic. Position the …
How to Change the Engine Oil of a Moto Guzzi V7
How to Change the Engine Oil of a Moto Guzzi V7
V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos