Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Fuel pump

Today’s information will show you how to remove and replace the fuel pump on a Citroen Xsara Picasso. First, open the rear doors and start removing the rear seats; to access the fuel pump without removing the tank, you will need to cut the metal panel, as shown in the video. At this point, disconnect the fuel line and unplug the electrical connector from the pump; then unscrew the pump retaining ring to remove it for repair or replacement. Finally, refit the rear seats!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Citroen Xsara Picasso fuel pump
Replacement of the Citroen Xsara Picasso fuel pump
Citroen Xsara Picasso (1999-2012 / MK 1) In this guide, we will see the instructions for disassembling and replacing the fuel pump of the Citroen Xsara Picasso. First, open the rear hatch of…
Guide to replacing the fuel pump of the Citroen Xsara Picasso 1.8
Guide to replacing the fuel pump of the Citroen Xsara Picasso 1.8
Citroen Xsara Picasso (1999-2012 / MK 1) Today's main steps will show us how to disassemble and replace the fuel pump of the Citroen Xsara Picasso 1.8. First, we lift the vehicle and start d…
How to Remove the Fuel Pump on Citroen Xsara Picasso
How to Remove the Fuel Pump on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How do you remove the fuel pump on a Citroen Xsara Picasso? First, disconnect the battery cables, then remove the rear seat cushions from the car. Un…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos