Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard of a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Dashboard

Before you start, enter the cabin. Begin by removing the trim surrounding the dashboard using a flat screwdriver. By removing this trim/plastic cover, you will expose the screws securing the dashboard. You will then need to unscrew and remove these screws. Once the screws are removed, you can slide the dashboard out of its housing. Before you can fully remove it, simply disconnect the various rear plugs. Once the plugs are disconnected, you will have successfully completed the removal.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…
How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How to Perform the Service Reset on a Citroën Xsara Picasso
How to Perform the Service Reset on a Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) On the Citroën Xsara Picasso, resetting the service light is done directly from the instrument cluster without diagnostic tools. In the video, the ca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos