Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the factory radio of the Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Car stereo

Today, we will look at the instructions that will allow you to remove and replace the factory radio of the Citroen Xsara Picasso. First, get in the vehicle and start by lifting the two side plastic caps; then unscrew the Torx screws found inside, pulling the radio out of the dashboard to remove it and disconnecting all the wiring on the back, as shown in the video. At this point, replace the radio with the new one, securing it properly to the dashboard; then check the correct operation of the radio!

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Standard Radio from a Citroen Xsara Picasso
Removing the Standard Radio from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) The instructions in this guide will allow you to remove and replace the standard radio of a Citroen Xsara Picasso in simple steps. First, get inside …
Replacing the Radio in Citroen Xsara Picasso
Replacing the Radio in Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will see how to remove the radio from the Citroen Xsara Picasso. First, get into the car and turn everything off: then take a scre…
How to replace the Citroën Xsara Picasso car radio
How to replace the Citroën Xsara Picasso car radio
Citroen Xsara Picasso (1999-2012 / MK 1) Today with the help of this short video tutorial we will explain how to replace the car radio on a Citroen Xsara Picasso. Before starting the replace…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos